Use this tool to find the codes of your devices and to get specific instructions on programming the codes into your Comcast remote.
I just purchased a new 40"LCD TV and then upgraded my service with another HD box and the TV and HD channels work great. However, the TV codes provided by Comcast for this TV doesn't work. I tried : 10885, 10889, 10890, 11282, 11577, 11100, 10080, 10111, 11548. The TV model # is VR-4085DF. I went onto the Westinghouse website and they do have a list of codes for COMCAST remotes but the codes are only four digits. This remote takes 5 digits. I tried a leading putting a "0" first and then the code but that didn't work either. I contacted Westinghouse about this but haven't heard back yet. This is very frustrating.
Also, the first code I tried; 10885 does chage the source of the signal on the TV when I press the volume button on the remote. So, it is sending a code to the TV but it is not working right.
Does anyone else have the same problem?
Does anyone know the correct code for this TV using the Comcast remote ?
12-08-2010 10:36 PM
Try 10000(0000 from the Westinghouse site),didn't notice that in your list
Also try 10463 or 10623 (White Westinghouse from the manual)
12-09-2010 12:37 AM
You can always try the search feature which takes a bit of time, but will find any code for any TV.
The directions for comcast remotes is below:
12-09-2010 11:28 AM
Try the above page and make sure you pick the right remote, they each have different remote codes.
Hope this helps.
12-09-2010 11:32 AM
Thanks to all for your responses. I have tried other codes and they do not work; 10451, 10000, 10623, 11661, 10463, 10661. Also, I tried the 991 code and only found a code that changes the TV source.
I also received a reply from Westinghouse which is not encouraging. They said:
We are contacting you regarding your recent request for assistance from our Customer Relations department, regarding your case.
We apologize for any inconvenience that this matter may have caused you. As a valued customer it is always our best intention to provide you with the best customer service possible. We are currently, dilligently working with the various service providers to get the remote codes that offer full functionality with the serivce providers Hardware (remote). As soon as the codes are available they wl be on our website in the Support tab under RemoteCodes. We will also be sending out an email blast with the remote codes as soon as they're available. Again we appologise for inconvenience, and we appreciate your patience.
It sounds like there is no code yet for this TV. I will contact Westinghouse tomorrow the old fashioned way, by telephone, and get verification about this.
If anyone has the correct code
12-09-2010 10:39 PM
I wish you luck. But when I checked out the Westinghouse site all I saw were 4 digit codes listed for Comcast remotes. Probably for the old grey select button remote.
12-09-2010 10:42 PM
10178 (samsung code) worked for my westinghouse 40" lcd
05-25-2012 12:29 PM
Thanks for the reply but code "10178" did not work either.
Do you have a VR-4085DF?
05-26-2012 09:56 PM
10000 worked for me with my Westinghose LCD. Thanks!
08-27-2012 10:06 PM
02-22-2013 12:30 AM
Try codes for Toshiba.
02-22-2013 11:16 AM
I had the same problem. A Toshiba code worked; I believe it was 10060.
03-10-2013 04:52 PM
I tried the following toshiba codes and they did NOT work: 10060, 10154, 11256, 10156, 11265, 10650, 10845, 11156, 11356, 11656, 11704.
I first posted about this problem in 2010 and still have no answer.
COMCAST is a big disappointment.They have no code for this TV model. Unbelievable!!!!
Thanks for responding though.
03-10-2013 11:13 PM
This link is to the remote code chart from Westinghouse.
Also try 00627 or 10178 if you haven't. Not codes for you model exactly.
But looking at the codes chart it looks like Westinghouse never provided codes for anyone beyond their own remote. So the maker of the Comcast remote has little to go on.
03-11-2013 01:00 PM
After 3 hours trying every code possibe '0000' worked perfectly. I have the Silver remote with a grey 'OK' button.
04-14-2013 10:18 PM
Thanks Commonguy but the codes didn't work for this model. Back when I originally posted I didn't find the Westinghouse code for this specific model either and it sounds like they still don't have one years later. The codes "00627", "10178" and "00000" don't work either. WESTINGHOUSE SUCKS. I will never buy another Westinghouse TV no matter how cheap or better it might be compared to other brands. They have lost my business for good.
04-21-2013 10:09 AM
Oh that finds a code that will turn power on/off but not the other buttons - or at least not the ones you need to change the input source for example - or the TV menu. Frustrating!
09-06-2013 05:25 PM
05-30-2014 03:39 AM
depends what remote you have
Comast remote Silver with Grey 'OK' REMOTE PROGRAM CODE IS: '0000' - THIS WORKS
05-30-2014 02:02 PM
12-21-2014 06:39 PM
Could everyone on this post clarify what has worked for them because with my 32" westinghouse TV and a Comcast remote I can not get any codes to work. I repeat, No matter how cheap the TV is, I will never buy another Westinghouse TV. Happy Holidays.
12-28-2014 07:46 PM
02-05-2015 07:08 AM
Have been frustrated with my lack of comcast capabilities with my westinghouse tv - Just for anyone's reference I used the 10000 code for that tv and it worked!! Thanks, I know this thread is for a 40 inch but if anyone has a 32 inch with the same issues - definitely try it!!
02-25-2015 06:15 PM
04-17-2015 11:30 PM
Alerts are an easy, quick way to manage your account and get information - like payment confirmations and your current balance.
©2011 Comcast | Investor Relations | Press Room | Corporate Blog | Privacy Statement | Visitor Agreement | Comcast.com Feedback | Site Map